• Transfers of high-definition.
• Resistance to scratches.
• Flexibility: heat transfers with high stretch without the transfer will see corrupted.
• Elastic: provide comfort to the garment.
• Durable: can be washed at 60 ° c without the color being affected
• Eco-friendly: the polyester film is recyclable and inks comply with regulations OEKO-TEX 100.
• With a matte finish: to avoid glare and that the transfer will see with more clarity.
• Can be applied on polyester, cotton, mixtures: the transfer can be applied to any type of fabric that support the specific temperature. It is recommended to do the test of strength before initiating any stamping series.
• Transfers to any garment: t-shirts, hats, vests, shoes, etc, Taking care with the seams, zippers and buttons that may affect the integrity of the heat platen.
• Very easy to apply: thanks to the transparent transporter.
• Bare hot: for a bare transfer instant.
• Breathable: Possibility of micro-perforated. Highly breathable.

• High stretch and recovery: the heat transfer returns to its initial shape after being stretched without being affected.
• Dry-cleaning.
• No glue stains: for a better visual effect of the transfer
• For any support textile light or dark: the color intensity in the transfer is the same
• Number of colors unlimited
• With support transparent: to place the heat transfer without error.
• Bare hot: allows faster in the stamping series

To apply the heat transfers should take the following steps:

1. Attached to the garment is clean and smooth. Avoid the stitching, the zippers, the buttons, and the creases that may affect the adhesion of the transfer textile or to the integrity of the presses, thermal.
2. Turn on the heat platen textile: Adjust iron 140-160 ºC-12”-3/4 bars. Play around with these variables to get a better printing of transfer textile.
3. Preheat the garment 5”: to remove the moisture and to ensure a better adhesion of the transfer.
4. Position the heat transfer on the garment-improvement of the positioning the heat transfer le with ESLAST, thanks to your carrier transparent.
5. Pressing between 4 and 12 seconds.
6. Peel the transfer: check out the transporter transparent instantly, when the transfer is still hot.

NOTE: recommendations for printing heat transfers:

Testing for resistance and washing before you start a drawing in series.

Use a protective teflon or similar.

For a definite, place the sheet conveyor transfer on top of this and press for 5” (ensures that the transfer is well adhered).

Some textile fabrics as the Soft-shell or Dri-Fit Fabric,, and more when they are red, they are susceptible to sublimate. This means that the color of these fabrics to transfer the ink from the heat transfer, Soiling it and producing what is called a “bleed”.

Our heat transfers with the PATENTED FORMULA, SOFT-TOUCH are extremely effective for block the migration of dye in fabric pigmented or sublimated, even when it is re-enabled their pigments during the application of the transfer or textile during washing (in any context where it is subject to the garment at high temperatures).